Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Intensively pigmented opaque for creating increased chroma, e.g. with limited space availability

• BeCe PRES

Separating liquid for crowns and bridges

It separates plaster from wax and metal very effectively. It has particularly proven itself in insulating stumps when wax caps are produced via the dipping process.

The low thermal conductivity of the plastic guarantees stress-free cooling of the duplicating material. Two wedges integrated in the flask cover prevent rotation and ensure proper placement of the form back in the flask.

The manual blasting unit for crowns, bridges and partial denture work.

CE

Rugged and powerful

• Ergonomically oriented design: relaxed working position, great hand freedom, large openings.
• Extremely rugged metal housing, small floor space required.
• Reliable even under maximum load.
• The injection nozzle integrated into the blasting material conveying system maintains an optimal proportion of blasting material in the compressed air flow of the recirculation system.
• Large charging flap and well illuminated blasting chamber through a dust-protected tubular lamp with long service life.
• High extraction rate through integrated filter module with quad-filter system.
• High collection capacity of the prefilter: 1.5 - 5 kg depending on type of dust.

Special corundum blasting material of 99.6% aluminium oxide (110 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (25 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

pecial corundum blasting material of 99.6% aluminium oxide (250µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (50 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Liquid for use with BeCe PRESS correction materials

Opaque liquid for thinning BeCe PRESS opaque paste

Opaque liquid for mixing BeCe PRESS powder opaque

Liquid for use with BeCe PRESS stain and glaze materials

Crucible engobe for Fornax® - and Nautilus® ceramic melting crucibles

This prolongs the life of the crucible and reduces casting residues in the melting crucible.

Exclusively from BEGO USA

Premium waxes that change color to give the technician greater control in placing the was and identifying readiness to carve. A .003 ash content ensures a clean burnout.

Exclusively from BEGO USA

Premium wax that change color to give the technician greater control in placing the wax and identifying readiness to carve. A .003 ash content ensures a clean burnout. Dipping wax properties maintain a uniform thickness after dipping.

Particularly rugged design for all dental applications. Shank diameter 2.35 mm.

Application of the measuring instruments in connection with partial denture technique for model analysis, measuring undercuts and marking the equator.

For crown and bridge work

Metal mould ring size 1 for 60 g of investment material. Long service life thanks to special steel design. Suitable for all BEGO crown and bridge investment materials.

Microprocessor-controlled preheating furnace for crowns, bridges and partial dentures

Ideal for every Crown and Bridge department.

• Microprocessor-controlled temperature regulation with digital display.
• Maximum preheating temperature up to approx. 1100 ºC.
• Maximum capacity of the mould compartment with the 100 MP: 12 -2 1/2" 180 g C&B moulds or 4 520 g partial denture moulds
• Up to 9 individual programs can be set.
• Up to 4 temperature holding levels can be entered.
• Programmable heating rate, linear heating rate of 1 - 9ºC/minute, 33.8 - 48.2 °F/minute.
• Programmable time for desired casting readiness, visual and acoustic signal for end of program.
• Corrosion-resistant, stainless steel exterior.

Microprocessor-controlled preheating furnace for crowns, bridges and partial dentures

Ideal for every Crown and Bridge department.

• Microprocessor-controlled temperature regulation with digital display.
• Maximum preheating temperature up to approx. 1100 ºC.
• Maximum capacity of the mould compartment with the 100 MP: 12 -2 1/2" 180 g C&B moulds or 4 520 g partial denture moulds
• Up to 9 individual programs can be set.
• Up to 4 temperature holding levels can be entered.
• Programmable heating rate, linear heating rate of 1 - 9ºC/minute, 33.8 - 48.2 °F/minute.
• Programmable time for desired casting readiness, visual and acoustic signal for end of program.
• Corrosion-resistant, stainless steel exterior.

Flux

For soldering precious-metal alloys and precious to cobalt-chrome or nickel-chrome. It saves intermediate soldering and provides strong joints that hold up even under great stress and strain. Minoxyd is also used for soldering metal-to- ceramic alloys in the furnace after firing the ceramic.

Ensures clean, smooth model base without grinding. Two sizes are available for both the upper and the lower jaw.
(U1, U2 = lower jaw, O1, O2 = upper jaw).

Fixed stainless steel tips offer great precision and accuracy in both denture and partial wax-ups.

Lightweight, aluminum shafts and fatigue-free design

The set contains the most important instruments for dental technicians.

BEGO offers a complete spectrum of wax patterns and sheets for designing any RPD framework.

Wax products range from block-out, wax clasp patterns, smooth and stipple sheet wax, saddle relief wax, wire rods, retention patterns, and sprue forms. The advantages for the wax patterns are that they are self adhering and need no paint-on adhesive layer. Also you are ensured of a 100% clean burn-out of your design with no breakdown of investment and the possibility of flashing on your casting. Wax patterns save time and money when finishing.

For partial denture technique

The set contains the most important instruments for dental technicians. Ideal for trainees! The instruments are also available individually.

These intensively pigmented modifiers can be applied if there is limited space availability or for highly defined characterization in the incisal region. Creative options are unlimited, as the modifiers can be mixed with enamel and transparent porcelains.

• BeCe PRESS

The vacuum mixer for all your laboratory needs

• For the mixing of investment and refractory materials, plaster, and duplicating silicone.
• 100 mbar vacuum output eliminates air bubbles trapped in the mixing material and prevents, at the same time, the development of boiling bubbles.
• Vacuum mixing bowls are fixed to the agitator coupling by means of a vacuum.
• Transparent vacuum mixing bowls in the sizes 250 ml, 550 ml, 835 ml, and 1200 ml.
• An electronic timer controls the mixing time with great accuracy and the digital display always shows the current vacuum in the mixing bowl.
• Spatula and mixing bowl geometry have each been optimized for both the investment and the duplicating silicon processing.
• Wall mountable.
• An attractively designed tabletop stand is available as an accessory for use as bench top unit.

The Automatic Vacuum Mixer

• Automatic vacuum mixing unit for the mixing of investment and refactory materials, plaster, and duplicating silicone
• Mixing program controlled with pre-programmed mixing parameters or manual mix override
• Vacuum mixing bowls are fixed to the agitator coupling by means of a vacuum
• Pre-programmed mixing programs take the chemical and physical requirements of the mixing material into account
• Program parameters for initial spatulation,mixing, pre and post-vacuum: rotational speed, rotational direction and time
• The Motova 300 has user friendly programming with only 3 buttons
• The 2-line display shows all program parameters, including the individually programmed ones, and also displays the requested product names
• Spatula and mixing bowl geometry have each been optimized for the investment and the duplicating silicone processing
• Wall mountable
• An attractively designed tabletop stand is available as an accessory for the use as a bench top unit

Eliminates fixing and grinding of the investment models when the BEGO combination duplicating flask is used.

Automatic vacuum/pressure casting unit.

CE

For Nautilus® ceramic crucibles

Nautilus® T/CC/CC plus

Ideal for rational and aesthetic modelling of chewing surfaces. The opaque wax is extremely easy to apply, the contours are clearly displayed already when heated. BEGO occlusal wax does not stain and is not sticky; it burns without residue.

Two intensities of Opal Incisal are available that create a natural, vital opalescence

• BeCe PRESS

Paste opaque with high masking power

• BeCe PRESS paste opaque provides excellent coverage, even in thin layers. It is very easy to use and highly cost-effective.

Powder opaque for BeCe PRESS

• Powder opaque for BeCe PRESS for use as an alternative technique to paste opaque.
• Particularly recommended for alloys containing zinc.

Special polishing compound for precious metal alloys

Also very suitable for "bio alloys". Palapol is economical in use, wax-bonded and provides for clean and extensively dust-free polishing. It contains no harmful quartz. The stick allows easy handling without the usual polishing block residues.

Precision surveyor with detachable table

• Precision bearings at all joints.
• Two horizontal joints (double hinged arm).
• Twofold vertically adjustable working level.
• Solid baseplate for 360 ° stability.
• Detachable precision model table with secure model locking device.
• Model table and tool holding fixture can be swiveled 360 °.
• Model holding plate can be swiveled with 0 ° lock.
• Use of a second work table possible.

Instrument for infinitely variable measurement of undercuts

• Parameter can be used for parallelometers such as BEGO's Paraflex.
• Shaft thickness approx. 3 mm.
• Infinitely variable measurement of undercuts: any required intermediate value can be measured.
• Precise measured value display: planned load applied to clasps is complied with.
• Rounded tip of measuring probe: trouble-free handling, no damage to model surface.

Multifunctional milling unit - including zirconium dioxide

Compact, precise and universal milling machine.

• Locking of joints via magnets
• Milling of wax and metal frameworks including zirconium (optional accessory)
• Low heat output LED light
• Milling arm designed as multi-functional arm
• Lever for lowering the drilling tool
• Control for the milling unit motor integrated in base
• Adjustable digital display
• Milling spindle with speeds up to 50,000RPM, anti-clockwise up to 30,000 RPM and quick-action tool chuck
• Drilling depth stop with micrometer screw 1/100 mm
• Selector switch for clockwise or counter-clockwise operation
• Ideal for milling and drilling in wax
• Extremely rugged, precision-made model table
• Precision quill for attaching accessories, measuring, etc. - can be fixed directly to milling arm if not used
• Electromagnetic locking of model table and milling arm via foot pedal

For Nautilus® and other casting systems

Funnel former for Nautilus® and other casting systems.

For Nautilus® and other casting systems

Funnel former for Nautilus® and other casting systems.

They are particularly resistant. For grinding after separation of sprues.

Blasting material for blast-polishing (125 µm)

Perlablast® consists of tiny lead-free soda glass beads that produce an even silky finish. There is no metal loss because the surface is compacted rather than abraded. No further finishing is required for surfaces that need not be polished. Perlablast® is used for all crown and bridge alloys to give a mat finisch to the chewing surfaces.

Blasting material for blast-polishing (50 µm)

Perlablast® consists of tiny lead-free soda glass beads that produce an even silky finish. There is no metal loss because the surface is compacted rather than abraded. No further finishing is required for surfaces that need not be polished. Perlablast® is used for all crown and bridge alloys to give a mat finisch to the chewing surfaces.

Plastic hollow sticks for distribution channels

Hollow sticks are used for non-precious metal alloys and those with reduced precious-metal content in metal-ceramic work. Length 16.5 cm, Ø 5 mm.

These plastic patterns available in the most popular shapes and sizes to meet all applications.

All patterns are self adhesive and transparent green in color to allow technicians to see through to the model for indicator lines.

Please reference the Plastic Patterns Chart in the Resources section below to view an image of a specific pattern

Plastic sticks for sprues

The sticks stabilise wax modelling in precious- metal work, are easily shaped over a flame and burn without residue. Length 16.5 cm, Ø 2.5 mm.

For the fabrication of platinum caps or to be used as a base for soldering

For dry polishing

These compounds are wax-bounded and enable clean and practically dust-free work. They do not contain any harmful quartz.

Particularly rugged design for all dental applications. Shank diameter 2.35 mm.

Textbook for partial dentures

280 page hard cover text book with over 1,000 color illustrations; manual for dental labs and dental practices geared to prosthodontics; ideal reference guide for partial denture planning design, techniques, milling, laser welding and more.

For partial denture technique

Preparation wax for placement under the saddle is supple and easy to adapt to master models.

BeCe PRESS ingots for the staining technique

• BeCe PRESS allows you to reproduce all 16 Vita shades with only 6 ingots.
• Two ingot sizes (2 and 5 g) ensure maximum flexibility.

Press-Ingots in opacious dentine shade for cut-back technique

• BeCe PRESS

Fully automatic sandblaster for up to 6 cast partial
denture frameworks simultaneously

Fast and efficient

• The integrated aim point in the nozzle enables exact positioning
  of the workpiece in the abrasive flow for quick,
  effective sandblasting
• Efficient use of blasting material emphasises the costeffective
  sandblasting
• LED lighting in the sandblasting chamber provides a service
  life ten times higher than that of conventional lamps
  for cost-effective sandblasting and reduces maintenance
  costs
• The swivel nozzle enables the unit to be used as an automatic
  or manual sandblaster for maximum application
  options in the laboratory
• The initial position of the nozzle can be magnetically
  locked for accurately setting the optimal nozzle angle
  during automatic and manual sandblasting to ensure the
  best possible sandblasting performance
• The viewing glass is locked in position by a magnetic
  switch: When it is opened, sandblasting is discontinued:
  for maximum operational safety
• The basket is easily removed - for increased comfort during
  manual sandblasting

• Time savings in relation to mould systems with foil sleeve, iron ring, etc..
• Compatible with Rapid Wax System.
• Minimal wear, thus lower costs than with comparable systems.
• Universally applicable for many casting systems.
• Easy separation of mould and mould ring.
• For all BEGO crown and bridge investment materials.

H1 (ISO 635 104 107 522 050)

Shank size 2.35 mm.

Extraction system for BEGO preheating furnaces

CE

Regulus is designed such that even large amounts of vapour are extracted quickly and thoroughly from the furnace compartment. The furnace extraction is controlled simultaneously by means of the timer of the preheating furnace.

For veneered crowns

Used for crowns to be acrylic-veneered and the partial denture technique, in the case of lack of space also in place of loop retentions.

For casting on

CE 0197

Applications: extracoronal, activating, partial dentures. Dimensions: tube height : 5 mm, length: 4.4 mm, head diameter: 2.5 mm.

Ceramically bounded, for rough grinding large areas. Shank size: 2.35 mm.

The green models for precious metal alloys; black for cobalt-chrome and all other non-precious metal alloys. Three different shapes.

Removable masking lacquer

Effectively protects clasp tips, attachment parts and other sensitive items during polishing. After polishing, Seculac is pulled off as a film.

For separating sprues

BEGO separating discs are high-strength and have a long service life. They ensure reliable separation of sprues thanks to high degree of rotational accuracy.